Disco Check Valve

LYV® is a leading China manufacturer,supplier and exporter. Adhering to the pursuit of perfect quality of Disco Check Valve, so that ourdisc check valve have been satisfied by many customers. Extreme design,quality raw materials, high performance and competitive price are what every customer wants, and that's also what we can offer you. Of course, also essential is our perfect after-sales service. If you are interested in ourdisc check valve services, you can consult us now, we will reply to you in time!

LYV® Disco Check Valve Introduction

LYV® disc check valve steel rod and reinforced nylon cloth as the substrate, the outer layer is made of rubber, the valve disc switch life is long. H44X(SFCV) series rubber flap check valve adopts full flow area design, with small head loss, not easy to accumulate debris, easy maintenance and other characteristics. H44X (SFCV) series rubber flap check valve is mainly suitable for horizontal installation of water supply and drainage system, can be installed in the water pump outlet, to prevent backflow and water hammer damage to the pump. The H44X(SFCV) series rubber flap check valves can also be installed on the bypass pipe of the reservoir inlet and outlet pipes to prevent backflow of pool water into the feed system. Check valves are generally suitable for clean media, not for media containing solid particles and viscosity

LYV® Disco Check Valve Parameter (Specification)

Nominal pressure: 1.0 ~ 1.6MPa

Nominal Tongjing: 50 ~ 600mm

Applicable medium: water and weakly corrosive fluid

Applicable temperature: 0 ~ 80℃

Flange standard: GB/T 17241.6 GB/T 9113

Test standard: GB/T 13927 AP 1598

LYV® Disco Check Valve Feature And Application

1, with small head loss, not easy to accumulate debris, easy maintenance and other characteristics.

2, the valve adopts full-flow area design, with small head loss, not easy to accumulate chores, easy maintenance and other characteristics.

3, the valve is mainly suitable for water supply and drainage system, can be installed in the outlet, to prevent backflow and water hammer damage to the pump.

4. The rubber flap is made of steel plate, steel rod and reinforced nylon cloth as substrate, and the outer layer is covered with rubber. The valve flap switch is long.